Top 7 Best Juicer for Celery 
When it comes to trends, some wain while others emerge and gain strength. This is definitely the case for juicers and especially for celery juice. This popular vegetable has taken the juice market by storm, and most juicers have developed special performance to handle the fibrous and soft components of the celery stalk. In this article, we review the celery juicer, a machine that can produce amazingly clear, smooth celery juice every time. We will present the best juicers for celery and add tips, pointers and information and provide you with additional information to help you decide which juicer to select.
Different Types of Juicers
There are many juicer types on the market; however, only three are relevant to celery, and these juicer types include:
Centrifugal Juicers are the speedsters of the group, (Centrifuge is the action of spinning around a center point) they are fast and furious and use powerful motors to rotate the teeth in the mesh chamber, essentially tearing and ripping up all fibrous materials and then forcing the liquid through a strainer. These models have a large feeder which removes the need to precut the celery sticks before inserting them into the juicer.
The downside of the centrifugal model is the heat, noise and internal oxidization created from high speed. When oxidization occurs, some of the core nutrients in the juice are eliminated and this is perhaps the main downside in quality of juice. On the flip side, these are beasts and will churn out all fruit and veggie contents without a thought.
Masticating juicers are slow juicers, (Mastication is the action of chewing) and this is due to their process is the slowest of the three juicer types. Theses models provide more than just juicing. However, when focusing on the juicing process their method of work requires to cut the celery sticks into small pieces down a smaller chute and into a smaller masticating chamber where an auger essentially squeezes the contents forcing the water out and passing it through a strainer.
Their downside is the speed at which they work and the necessity to precut the celery into smaller sizes.
Triturating juicers are large machines that contain two rollers that rub and crush as well as grind the contents that are poured into it into a fine pulp. The rollers and teeth catch the celery stalks and decimate them until the juice is free. The rollers have a tiny gap of around 0.1mm between them, and this squeezes the water out of the celery and pushes it through the strainer.
Triturating Juicers are the expensive juicers but also the best as they release all the juices and nutrients without damaging either and these models rotate at relatively low speeds in a range between 80RPM to 160RPM.
Quick Comparison: Top 7 Best Juicer for Celery on the Market
1. Breville 800JEXL Fountain Elite Juicer
The Breville Juice Fountain Elite has a very large capacity motor with large pulp container. This model is made from titanium with stainless steel and composite polymers, so it is 2/3rds lighter and just as tough but will never rust or corrode.
This model is more expensive due to the materials used in its construction, and while it is a high-grade product, does deliver exceptional performance. The overall design is eclectic and the chances of this model breaking down are negligible.
2. Cuisinart CJE 1000 Die Cast Juicer
The Cuisinart CJE-1000 uses a 1,000 Watt motor to cut all materials, especially celery. This juicer will not stop at anything, and you just need to make sure you don’t overfill it or push too hard down the chute. When it comes to leafy greens, you do need to cut them up first, and you will find it needs some coaxing to juice them up completely.
This model comes with a 3” feeder chute, and has 5-speed options, this means you get to control all juicing options in one machine. The filter basket is easy to remove and clean, making this an exceptional product at a very reasonable price.
3. Mueller Austria Ultra Juicer
The Mueller Austria Juicer Ultra is an ultra-modern designed stainless steel juicer with a silver finish. What stands out in this model is the large chute and the two-speed levels that allows you to select between 12000 RPM to 15000 RPM and higher speeds of 15000 RPM to 18000 RPM.
This streamlined juicers two-speed levels lets you juice all veggies and fruits, especially celery without having to cut them up before juicing.
4. Omega J8006HDS Nutrition Center Juicer
The Omega 8006 is a low-speed juicer that churns at 80 RPM. It is powered by a 200 Watt motor and masticates the celery with ease. What stands out with this model is versatility with leafy greens and its silent running. This is one of the best celery juicers on the market.
The design of this amazing juicer is quite modern, and the large motor with single masticator provides plenty of power and enjoyment as you watch the juice churn and pour out into your cup or glassware.
5. Hamilton Beach Juicer
The Hamilton Beach Juicer Machine is an easy to clean and easy to use inexpensive model and due to its value for money stands out in the market. However, it is a relatively noisy model, which for many is fine, since it manages to extract around 72% of all the celery juice, which is extremely high for any juicer.
The standard black design is solid, and you get a direct feed from juicing to glass. The overall design is standard and will not stick out in the kitchen, which some prefer.
6. Aicok Slow Masticating Juicer
The masticating Aicok Slow Juicer is another exceptionally priced product that churns the celery at around 80ROM and uses a small 150-watt motor. This model is quiet and is BPA free making it a very useful and comfortable appliance to sit on any kitchen top.
7. Koios Masticating Juicer
The KOIOS slow juicer masticates at 80 RPM and is a newcomer to the juicer appliance scene. This model stands up to the competition and is useful in handling all food types especially celery. The design is modern and versatile and it can be stripped down and reassembled in seconds. The only downside is that is can be less effective when handling some of the more leafy greens.
Things You Need to Consider Before Buying Juicer for Celery
Purpose - Demand for use
Juicing celery is extremely useful for celery fans that love all things celery. This means you can juice the sticks for a wonderfully refreshing drink or you can juice celery for adding it as an ingredient for recipes. Whatever reason you want a juicer for, you do need to consider the following features and functions.
Obviously, you are constrained by your purchasing power, so first, off you need to limit your buying range to what you can afford. Luckily the market is full of inexpensive yet exceptionally good juicers.
There are three juicer types, and speed is a variable in all of them. If you are in a rush and want fast juice, then you must buy a centrifugal juicer, otherwise, buy either slow juicer types. The constraint between the two slower models will be in price. Also factor in whether you have more than one speed level for handling different food products.
This is always an issue when juicing, so consider whether your requirements include a lot of leafy products. If so, do not buy a juicer that has issues with leafy greens, or you will be frustrated.
Assembly and Disassembly
Consider the time it takes to disassemble the juicer for cleaning and also how fast it can be reassembled. Factor into this the ability to wash it, and also the materials used. You might reconsider buying one model only from the chance it could break sooner, or components crack or deform when disassembling and assembling it often.
Consider how much juice you want and how easy it will be to feed the celery into your juicer. Some juicers require pre-cutting, so make sure the chute is big enough for appropriate sized chunks, or for the whole sheaf of stalks.
This is a major factor for some buyers, so always listen to the juicer before buying it and consider its noise level and your home requirements.
Check the length of your power chord, you need to consider this if you are placing the juicer in a stable location and need to reach the power outlet for that location.
Size is important for two reasons; location and amount of juice to process. You need to locate your juicer, and this demands you factor in the size of the appliance and where it will stand. The overall size of the device will also determine how much juice you can process per batch.
There are fundamental differences between the three juicer types, but within the types, there are different designs and color schemes to choose from. Once you have decided on the type of juicer you want, consider the color and design, but do not select a juicer model solely on its design. Check out all its other parameters.
Material (Blade, Filter Mesh)
The materials range from cheap plastics to expensive metals such as titanium. Never buy cheap even if your budget cannot afford a better juicer. Poor materials will lead to bad performance and end up in wasted money on a device that breaks or doesn’t work properly. Make sure the blades are stainless steel and that the filter mesh is either stainless steel or a composite material that does not corrode. Do not buy cheap breakable plastics, as this will lead to cracks and warps.
The size and shape of the jar
Most juicers come with two jars, a larger juicer jar made of a sturdy material such as stainless steel and a smaller one for solids. The shapes are generally round, but some do come with tapered tops or slightly angled sides. Just make sure the jar you buy is solid and easy and safe to install and remove for cleaning.
Power refers to the motor size, and this is where the size matters. The larger the motor, the more power you get. In the slow juicers, the motor has to be powerful enough, as a tank engine, to churn the food slowly but consistently. The faster cutters and rollers require stronger motors to drive speed. Both require powerful motors, but the application of the motor is different. The slow ones need the power to push against constant friction.
When buying an appliance always make sure you have a minimum 3-year warranty, the more reliable the device the longer the warranty.
There are a lot of brands, and there is a lot of competition and marketing around which one is the best. The only way to solve this is to consider what you like the best in each brand. Remember, warranty and price are a true indication of quality. Some of the consented top brand names include Breville, Omega, Philipps, Cuisineart. There are always newcomers, but they need to prove their worth over time.
As mentioned above, there are three types of juicer. The technology is basically the same with each one. There is an electromechanical motor structure that drives power to a roller or cutter. The only differences in technology that can affect the way the system juices is in the overall structural design, the material used and the different cutting edge or roller surfaces.
Always buy an appliance from a respectable source that provides you with a real warranty and shows you where you can purchase replacement parts. All leading brands have plenty of outlets as well as online options to find accessories and replacement parts.
The Unexpected Benefits When Using The Juicer?
We shall break the answer down into two sections; the first section is subjective, and the second is objective.
Subjectively juicing is amazing, it provides a clear fresh juice to drink in the flavor of choice. You can mix flavors too and create some amazing drinks. In regard to celery, it’s a great fresh drink and as a liquid used for creating other dishes.
Objectively juicing celery has no advantage over eating celery other then it makes the celery into a juice rather than a crunchy snack.
Common Problems Associated with Using Juicer for Celery
Machine does not work when plugged in
There are a number of reasons that a juicer might not work when plugged in. These include not locking all the compartments correctly, especially with magnetic locking models. The other could be faulty wiring, and the third could be faulty motor or electronics
The machine has slow speed and low performance
One of the main reasons a machine suddenly slows down is due to clogging or corrosion in its motor axis. What you need to do is open up the juicer and disassemble the motor assembly, clean the rotor/roller and clean all the mechanical components.
The machine stopped working suddenly
Two of the main reasons machine stops operating suddenly is due to a faulty wiring or faulty electronic component. Mechanical components tend to cause issues before they break and therefore, they do not cause a sudden stoppage. There are signs beforehand if you ignore the signs, then the cause will continue to deteriorate until something breaks.
The juicer slowly or doesn't produce water
When a juicer does not produce water is working slowly, there are two causes. The first cause is that you are ramming food in so fast it's blocking the internals and the motor cannot handle the flow. The second is that there is a blockage in the release tube, and water cannot flow out.
The machine is rusty (outer shell, blade)
This can only happen with ferrous metals, that is alloys of iron such as steel. Some stainless steels will rust too. Rust occurs when surfaces are not cleaned properly or when the metal is inferior and can rust. If you have rusty equipment, check your warranty for instructions.
The machine leaks water
There are a number of causes of leaking machines, and these start with plastic machines parts that deform when heated. This can occur when you wash them in dishwashers or under hot water. The other reason is that there is a crack or damage in a seal.
Machine is stuck with the blade
If your machine blade is stuck, you need to oil the cutter spindle and wait for it to help release the stuck blade. Olive or coconut oil is best to use for this.
The machine is clogged filter mesh
Clogged filter meshes cause the juice to back up and flow into the pulp container, it also causes the juice to flow slower. This is one of the first things to check when juice flows slower, and all you need to do is clean the mesh.
How to Use the Juicer for Celery Properly?
Locate your juicer in an appropriate location for ease of use.
Make sure you have all the parts in place, fully assembled and clean.
If the juicer is not clean, you are endangering yourself from bacteria and viral infections.
Select the fruit/veggie you want to juice.
Make sure the fruit/veggie is washed clean, and if you are particular about peel, remove it. Always remove pits and seeds. (unless it’s a dragon fruit or grape)
Dependant on the type of juicer you have you either pre-cut the fruit/veggie or you put it in whole.
Never force-feed and never overload the chute.
Select the speed if you have a variable speed selector.
Plugin the juicer
Some juicers directly feed to your glass or jug, so place it under the receiving spout.
Turn on the juicer and start to pulp the fruit/veggie.
Once finished, unplug the appliance.
Detach the jar and pour out your juice, and also clean out the pulp.
Juicers are great kitchen appliances and allow you to enjoy any fruit or vegetable flavor in a refreshing drink form. As with any other appliance, you must make sure it is always clean and must make sure you buy a brand that provides you with reliability and durability.